Baumerk · Waterproofing materials from Turkey
Geotextile, drainage boards, waterstops and tapes
Accessories for waterproofing systems: non-woven geotextile, drainage dimple boards, PVC waterstops, termination bars, concrete fibre, self adhesive and reinforced tapes, root barrier foil.
Prices on request. We prepare a quote for your volume and delivery country.
Specifications
- Country of manufacture
- Turkey, Istanbul
- GEOTEXTILE
- non-woven polyester and polypropylene geotextile; width 1–6 m, 100–1,200 g/m²
- DRAIN-B, DRAIN-B GEO
- HDPE protective drainage dimple board, 400–600 g/m²; 2 × 20 m roll
- PVC WATERSTOP
- PVC waterstops; 15, 20 or 25 m rolls
- PROFILE AL, B-ROD
- aluminium termination bar, 3 m, and backer rod for joints
- FIBER
- concrete reinforcement fibre, 6–24 mm; 450–1,200 g/m³; 600 or 900 g pack
- B-SELF TAPE AL
- bitumen based self adhesive tape, aluminium foil or mineral top surface; 5–60 cm wide, 10 m roll
- PH 127 K
- waterproofing tape with non-woven fabric; 120 mm wide, 50 m roll
- PH 127
- waterproofing tape with fabric; 120 mm wide, 50 m roll
- PH SELF
- butyl rubber self adhesive tape; 1–4 mm thick
- LDPE MEMBRANE
- LDPE root barrier foil; 4 × 25 m
Logistics
- Shipped from
- Istanbul, Turkey
Request a price and quote
Prices on request. We prepare a quote for your volume and delivery country.
Requests are handled by the marketplace team in Almaty. We reply in English or Russian.
Other products
-
No photo yet
Baumerk
SBS-modified bituminous waterproofing membrane
- Cold flexibility: down to −20 °C
- Thickness: 2–4.5 mm
-
No photo yet
Baumerk
APP-modified bituminous waterproofing membrane
- Cold flexibility: down to −5 °C or down to −10 °C, depending on the series
- Thickness: 2–4 mm (C 2000: 2 mm, P 4000: 4 mm)
-
No photo yet
Baumerk
Special bituminous membranes: self-adhesive, root-resistant, bridge-deck
- Self-adhesive: laid without a torch, at low temperatures
- Root-resistant: APP or SBS with root-resistant additives
-
Baumerk
Liquid bitumen-rubber waterproofing and primers
- Application: cold, without heating or thinning
- Consumption: 0.8–1.0 kg/m² per coat (1K and W)
We will request the full catalog from the factory and send it to you. Leave your phone or email in the form at the bottom of the page.
Close