Ekmen Plastik · PVC compounds and granules from Turkey
PVC granules for injection molding
Granules for molding floor tiles, car mats, welding holders and electrical plugs. The formulation is designed for resistance to sun, water, steam and oil. The formula is matched to each of the customer's molding machines.
Prices on request. We prepare a quote for your volume and delivery country.
Specifications
- Country of manufacture
- Turkey, Istanbul
- Formulation
- for each of the customer's molding machines
- Products
- PVC floor tiles, welding holders, car mats, electrical plugs
- Where the parts are used
- automotive, household appliances, electronics, outdoor products
- Properties by application
- resistance to sun, UV, water and steam, oil, bacteria and rodents
- Granule properties
- resistance to fats, oils and chemicals; chemically stable; low volatile content, so bubbles appear less often in the molding
- Formula selection
- based on measurements taken directly on the machine; each customer has its own formula
- Production
- 1,500 t per month on four lines. Coperion, KraussMaffei and other extruders according to the factory
- Raw material origin
- European according to the factory
- Raw material control
- suppliers are checked against TDS and MSDS for REACH and RoHS compliance. New raw material goes through six months of trial testing before launch
- Batch control
- in-house laboratory: density, strength, elongation at break, water absorption
Logistics
- Packaging
- 25 kg bags; big bags up to 1,200 kg
- Pallet
- 100 × 120 cm pallet: up to 60 bags, 1,500 kg. 100 × 100 cm pallet: one big bag up to 1,200 kg. Height up to 170 cm
- Container
- 40 ft: 20 pallets, up to 24 t net. 20 ft: 10 pallets, up to 16 t net, or 860 bags without pallets, up to 21.5 t net
- Loading
- truck: 20 pallets of 100 × 120 cm, up to 24 t net
- Shipped from
- Istanbul, Tuzla district
Documents
| Document | Issued to | Valid until |
|---|---|---|
| ISO 9001:2015, design, production and sale of PVC compound (SZT.2021.SB.2.0.493, issued by Szutest) | Ekmen Plastik | 01.12.2026; certification period ends 01.12.2027 |
| ISO 14001:2015, same scope (SZT.2021.SB.2.1.054, issued by Szutest) | Ekmen Plastik | 01.12.2026; certification period ends 01.12.2027 |
| ISO 45001:2018, same scope (SZT.2021.SB.2.14.074, issued by Szutest) | Ekmen Plastik | 01.12.2026; certification period ends 01.12.2027 |
Request a price and quote
Prices on request. We prepare a quote for your volume and delivery country.
Requests are handled by the marketplace team in Almaty. We reply in English or Russian.
Other products
-
Ekmen Plastik
PVC compound for cable
- Frost resistance: cable grades rated down to −40 °C to −60 °C
- Cable operating temperature: +70, +90, +105 and +125 °C
-
Ekmen Plastik
Medical PVC compounds
- EKP-MG80E: tubing for solutions, blood and air
- EKP-MG90E: catheters
-
Ekmen Plastik
Specialty PVC compounds
- EKP-10 and EKP-15: milk hoses
- EKP-1040 Yellow: for bus interiors under ECE R118
-
Ekmen Plastik
Rigid PVC for window profiles
- Shape: granules or dry blend
- Rigid PVC production: on a fourth production line since 2023
We will request the full catalog from the factory and send it to you. Leave your phone or email in the form at the bottom of the page.
Close